Category: Behringer
-
Behringer Grind
Just announced by Behringer the new hybrid Grind synth, which is a sort of Mutable Instruments Plaits in Synth form! This looks very interesting indeed and would sit nicely alongside my Crave.
-
Multitrack your Mixer with a Patchbay
Why Multitrack? When I first started in DAWless, I created a hybrid almost DAWless setup where all my different synths were patched into an 8 port Audio Interface on a PC. With this interface, the levels could be controlled, and once the configuration is set, it will continue to work offline as a mixer without…
-
Behringer Crave Mod Wheel Patching
I have owned a Crave for a while now, but only recenly starting delving into the patching options more. So here is a useful nugget about how to use the Modwheel on an external synth to control parameters on Crave. Assign Ouput There is an output port on the Crave called Assign. Connect the Crave…
-
Cheap Acid: Behringer TD-3 Review
The Behringer TD-3 is a faithful recreation of the classic Roland TB-303 Bass Line synthesizer, with the same classic sound, some added features and enhancements, and the same love it or loath it sequencer (more of that later) at a bargain basement price. Design and Features The TD-3 has a very similar design and layout…
-
Behringer Crave Auto Sync Sequencer
I typically use the Behringer Crave with an External Clock sync set, so that any Arpeggios or Sequences are in time with the other gear it is synced to. However when you want to use an external sequence from a device such as the Circuit Tracks, there is an annoyance that a MIDI start signal…
-
Ambient Live Looping with Behringer Crave and Valeton GP-200
Building an Ambient loop using just a Behringer Crave mono synth and the Valeton GP-200 MultiFX guitar pedal which has a built in looper. Despite owning many different instruments, sometimes it can be great fun to restrict a session down to just one or two. Using a looper is an interesting way of discovering new…
-
How to change the Behringer TD-3 Clock Sync
The Behringer TD-3 won’t make any sound if it is set to an external clock sync, but no clock is connected. To change the Behringer TD-3 Clock source, stop any sequence and then press BACK and WRITE/NEXT at the same time to enter the sync mode. The current clock source 1-4 and clock rate 5-8…